|
Max Sheet Size - 36 cm (14”) x 57 cm (22.5”)
Min Sheet Size - A4 (8.5” x 11”)
Max Speed - 30 meters/min (100 feet/min)
Paper Weight - 90 gsm (60lb) to 650 gsm (24pt)
· Small footprint of 1.7 m x 1.1 m (5.6’ x 3.6’)
· Sticks to any sheets produced by any digital press
· Laminating nip pressure up to 9 metric tonnes
· Very heavy duty build quality - 25 mm (1”) thick
steel side plates with 150 mm (6”) x 75 mm (3”) steel
support beams
· 250 mm (10”) diameter highly polished chrome laminating
roller
· Film is mounted on a quick-change airshaft
· Trim slitter and perforating mechanism
· Pneumatic clutch ensures precise film tension
· Available with Perfector option (see below)
· Swiss made water heater
· Fitted with bottom separation, continuous suction Heidelberg-Stahl
suction drum feeder
· Air inflates the pile from the bottom and sides, allowing
the sheets to float on a bed of air.
· The feeder is continuously replenished with sheets top
loaded on the run, every three of four minutes, thus providing continuous
feed.
· Integral bump roller separator runs in-line.
· Features include an adjustable anti curl bar, pneumatically
adjustable in-feed nip rollers, and a pneumatic air clutch to give
a constant tension between the laminator and the sheeter, producing
flat sheets.
· Sheets are delivered into a vibrating jogger.
· A litho printing term for two sides in one pass.
· Additional quick-change airshaft and heated rollers to
allow two sided laminating, with a chill roller to cool the product
prior to delivery.
· Siemens sinamics and simotion electronics, using a remote
diagnostics facility.
|