Max Sheet Size - 76 cm (30”) x 102 cm (40”)
Min Sheet Size - A4 (8.5” x 11”)
Max Speed - 45 meters/min (100 feet/min)
Paper Weight - 90 gsm (60lb) to 650 gsm (24pt)

Laminator
· Footprint of 2.9 m x 1.5 m (9.5’ x 4.9’)
· Laminating nip pressure up to 6 metric tonnes
· Very heavy duty build quality - 25 mm (1”) thick steel side plates with 150 mm (6”) x 75 mm (3”) steel support beams
· 250 mm (10”) diameter highly polished chrome laminating roller
· Film is mounted on a quick-change airshaft
· Trim slitter and perforating mechanism
· Pneumatic clutch ensures precise film tension
· Available with Perfector option (see below)
· Swiss made water heater

Feeder
· Fitted with bottom separation, continuous suction Heidelberg-Stahl suction drum feeder
· Air inflates the pile from the bottom and sides, allowing the sheets to float on a bed of air.
· The feeder is continuously replenished with sheets top loaded on the run, every three of four minutes, thus providing continuous feed.

Sheeter
· Integral bump roller separator runs in-line.
· Features include an adjustable anti curl bar, pneumatically adjustable in-feed nip rollers, and a pneumatic air clutch to give a constant tension between the laminator and the sheeter, producing flat sheets.
· Sheets are delivered into a vibrating jogger.

Perfector (Optional)
· A litho printing term for two sides in one pass.
· Additional quick-change airshaft and heated rollers to allow two sided laminating, with a chill roller to cool the product prior to delivery.

Electronics
· Siemens sinamics and simotion electronics, using a remote diagnostics facility.