Max Sheet Size - 74 cm (29”) x 52 cm (20.5”)
Min Sheet Size - A4 (8.5” x 11”)
Max Speed - 60 meters/min (200 feet/min)
Paper Weight - 90 gsm (60lb) to 650 gsm (24pt)

Laminator
· Footprint of 2.9 m x 1.5 m (9.5’ x 4.9’)
· Laminating nip pressure up to 6 metric tonnes
· Very heavy duty build quality - 25 mm (1”) thick steel side plates with 150 mm (6”) x 75 mm (3”) steel support beams
· 250 mm (10”) diameter highly polished chrome laminating roller
· Film is mounted on a quick-change airshaft
· Trim slitter and perforating mechanism
· Pneumatic clutch ensures precise film tension
· Available with Perfector option (see below)
· Swiss made water heater

Feeder
· A rising pile, back separation Heidelberg Speedmaster 74 feed head & a vacuum feed table.
· The feed head is processor controlled, resulting in an accurate under-lap.
· The feeder is fitted with a mill skid plate, allowing a full pallet of print to be loaded directly from the printing press.

Sheeter
· Integral bump roller separator runs in-line.
· Features include an adjustable anti curl bar, pneumatically adjustable in-feed nip rollers, and a pneumatic air clutch to give a constant tension between the laminator and the sheeter, producing flat sheets.
· Sheets are delivered into a vibrating jogger.

Perfector (Optional)
· A litho printing term for two sides in one pass.
· Additional quick-change airshaft and heated rollers to allow two sided laminating, with a chill roller to cool the product prior to delivery.

Stacker (Optional)
· Mirror image of feeder complete with mill skid plate that returns laminated sheets back into pile form.
· A photoelectric cell detects the front of the incoming sheet and opens four pneumatic joggers whilst activating three under sheet air blasts to float the sheet across the pile.
· Slow down drop wheels and the pneumatic joggers position the sheet on the pile.

Electronics
· Siemens sinamics and simotion electronics, using a remote diagnostics facility.