Max Sheet size - 76cm (30") x 105cm (41")
Min Sheet Size - 21.5cm (8.5") x 14cm (5.5")
Max Speed - 60 meters/min (200 feet/min)
Paper Weight - 90 gsm (60 lb) to 650 gsm (24 pt)
Film Range - 75 micron (3 mil) to 250 micron (10 mil) thermal

Encapsulator
· 25mm (1") thick steel side plates with 150mm (6") x 75mm (3") steel support beams.
· 300mm (12") diameter pre-heat rollers and 300mm (12") water chilled rollers.
· Servo driven sheet correctional device dictates precise gap between sheets.
· Film is mounted on a quick change air shaft which is micro adjustable laterally along with side slitters and an edge trim chipper which collects waste and expells it through a 100mm (4") pipe to an outside waste skip.
· Pneumatic clutch ensures precise film tension.
· Application of polyester, polypropylene and nylon film in 75 micron (3 mil), 125 micron (5 mil), and 250 micron (10 mil) thickness.
· Swiss made water heater and water chiller.

Feeder
· Rising pile back separation stream feeder with a servo driven Heidelberg Speedmaster 52 feed head.
· Sheets are fed down an angled feed table with a micro-adjustable side-lay and up to a servo driven sheet correctional device.
· The feed head is processor controlled.
· The feeder is fitted with a mill skid plate, allowing a full pallet of print to be loaded directly from the printing press.

Cross-Cutter (CC 76)
· Servo driven in-feed rollers and servo driven cross-cutters for sheet seperation.
· The accuracy of the feeder allows for a single cross cut.
· Delivery onto a shingle table for collection in a vibrating jogger.

Electronics
· Siemens sinamics and simotion electronics, using a remote diagnostics facility.